|
Post by YellowRubi on Dec 12, 2008 5:36:49 GMT -5
if you don't do a lot of off roading and your jeep is more a daily driver then you are fine. Some spring kits come with the pucks and most don't the only other alternative is a real suspension lift. The cost difference is hundreds of dollars. Its not a bad first cheap lift or an add on to a smaller spring lift. But if off roading is what you want to do then go for a real suspension lift. good luck
|
|
|
Post by Founding Father on Dec 12, 2008 7:34:40 GMT -5
Bump stops for what? They limit the flex and the tire will stop when it hits the fender just look at my fenders.
|
|
|
Post by GrassRootsPR on Dec 12, 2008 11:14:00 GMT -5
Your tires are your bumpstops
|
|
|
Post by rredneck on Dec 12, 2008 11:18:54 GMT -5
OK THAT WHAT THERE FOR
|
|
|
Post by rredneck on Dec 12, 2008 11:52:47 GMT -5
IF ANYONE IS BOARD SAT ? I'M PUTING LIFT KIT IN
|
|
|
Post by cobra001 on Dec 12, 2008 13:39:25 GMT -5
Guys, All joking aside it sounds to me like he is genuinely asking for direction.To tell him that his tires will replace the bump stops is the wrong thing to do.What will you say to him when we are on a ride and he flexes to a point where his tire damages a fender?I know that I would not want to be put in that position. Vince
|
|
|
Post by rredneck on Dec 12, 2008 13:47:34 GMT -5
i new he was joking on that one. i like bumper stop
|
|
|
Post by HamiltonLJ on Dec 12, 2008 14:20:17 GMT -5
My tires have bent my fenders! If they didn't give you b-stops don't worry about it just don't disconnect the sway bar and you'll be fine. The only time I disconnect is on the rocks other than that for mud theres no need to disconnect. Sorry if I misled you!
|
|
|
Post by GrassRootsPR on Dec 12, 2008 14:55:27 GMT -5
Your stock bumpstops should be fine. They do make different size bumpstops for different size lifts though, but you'll be fine with the stock ones.
|
|
|
Post by rredneck on Dec 12, 2008 14:56:57 GMT -5
it's all good this is my first coilspring lift kit . I know how to do leafspring liftkits
|
|
|
Post by mossyoaktj on Dec 12, 2008 16:22:34 GMT -5
stock bumpstops will be fine cuz spasers dont give u any more flex they just give u room for bigger wheels.
|
|
|
Post by rredneck on Dec 13, 2008 9:16:03 GMT -5
NEED HELP SPRING WONT COME OUT
|
|
|
Post by HamiltonLJ on Dec 13, 2008 10:52:38 GMT -5
PM sent call me
|
|
|
Post by rredneck on Dec 13, 2008 11:28:01 GMT -5
ok
|
|
|
Post by cobra001 on Dec 13, 2008 14:45:05 GMT -5
Did you get them out?Did you disconnect the sway bar. The only thing holding the springs in is the sway bar. Unbolt the sway bar-lower the axel until its hanging on its own-step on the rotor until the spring looses tension and remove Vince
|
|