|
Post by muckcityjeep on Jun 2, 2009 20:50:25 GMT -5
Think I could squeeze them onto my ZJ with 3.5 inches of lift? Is it possible to do enough trimming to make it work?
And on a related note if I moved to 33 inch tires anyone know how to regear that would be willing to help? Not for free of course.
|
|
|
Post by Founding Father on Jun 2, 2009 21:21:02 GMT -5
that may be a tough job to do i barley fit 31s with 3 inch lift
|
|
|
Post by muckcityjeep on Jun 2, 2009 21:29:42 GMT -5
I think I have enough room to fit them in the wheel wells believe it or not. Im thinking the big problem would be them rubbing all over the place. You could take a look at the Lucas Jeep thing on saturday
|
|
|
Post by muckcityjeep on Jun 2, 2009 21:49:37 GMT -5
I just went out and measured the hub to fender height and it looks like i have almost 4 inches of lift in the front and 4 in the back as long at the stock measurement is 18 inches. So maybe I could frankenstein it
|
|
|
Post by HamiltonLJ on Jun 3, 2009 7:04:19 GMT -5
The event Sat. will be a good place to look at it you may even see another ZJ with 33s to take notes from. I'd even be willing to have you come up to my house to try my 33s on for size. I'd hate to see you dump a bunch of money in tires you can't use. As for gears I wish I could help I have 3.73s in mine I would like to have 4.10 or even 4.27s. We'll see you Sat.
|
|
|
Post by muckcityjeep on Jun 3, 2009 10:10:30 GMT -5
Thanks! Yeah I wasnt going to get a new set of tires unless I was sure I could make them fit. Even if I need to lift it a little more it wouldnt be as expensive as the regear. Pretty sure I have 3.53s which would be terrible on 33's.
Yeah Im looking forward to the show and I was thinking i could try to throw someones spare on to see if it would fit.
|
|