I can chime in,,,,,you need a complete wire harness for under the hood,,you have to move your motor mounts back 2" new rad. now you may get lucky with the wire harness like i did and it was plug and play with the dash if not you need to replace your dash harness as well. you will also have to get new drive shafts front and rear plus the tranny has to be upgraded as well,and a new computer. Its an easy job if you have all the skills to weld and all that. your best bet is to find a donor in the junk yard with a wire harness to start with,,or for about $8k you could buy my rig. Good luck with your swap!!
If it's not dirty it's not a jeep 95yj 4.0 Trans plant 4.5 R.E H.D Lift 35" Baja Claws currie 9" rear locked up 9500lb mile marker Tom Woods shaft's SYE Us alloy front shafts 1"BL
rockauto: I just updated the discount code at the top of this thread!
Jan 6, 2017 10:59:19 GMT -5
sunwolf: Need help in rewiring 1990 xj steering column replacement,..........I'm not familiar with the wiring plugs and don't know where they all go! It was given to me after the wires were pulled for me to find out,.........any hekp is appreciated!
Mar 2, 2017 12:06:33 GMT -5