|
Post by muddin310 on Nov 22, 2010 10:56:41 GMT -5
i have a ford 9 rear do i have to switch out the axles from my yj to the ford rear
|
|
|
Post by Lyon on Nov 23, 2010 17:36:55 GMT -5
Are the axle shafts bad on the ford rear? Or are you asking to change them because of the lug pattern? Check out this link.... www.bc4x4.com/pv/tj/ra/ra.cfm
|
|
|
Post by waterman on Nov 24, 2010 8:29:59 GMT -5
i have a ford 9 rear do i have to switch out the axles from my yj to the ford rear No go to curries web site and by the rotors drilled out for the yj pattern!! I have a currie 9" in my yj and the rotors are drilled out for both ford and jeep pattern. If the 9" is still drum set up switch it to the rotors buy the ford 11" disc set up,than you will have to switch out your master cylinder for better braking,,its and easy swap as well. I have a write up on the swap Just pm me if you need any other info on the swap.
|
|