|
Post by dacjeep on Feb 22, 2011 18:53:17 GMT -5
I have the number 2 setting on the fan blower that doesn't work. All the other speeds do work... anyone have any thoughts on this one.... ?
|
|
|
Post by billdacat on Feb 22, 2011 19:52:12 GMT -5
Yep...Blower motor resistor... BTDT: twice. Rockauto has them; but the last one I bought was DOA. I had to re-solder two resistors (wires) to get it working.
|
|
|
Post by dacjeep on Feb 22, 2011 22:25:05 GMT -5
where's it located?....
|
|
|
Post by billdacat on Feb 23, 2011 16:12:04 GMT -5
The resistor module is mounted on the air plenum behind the glove-box. It is held with two screws and looks like a large connector with several wires coming out of it. There is a little red tab that slides over to release the connector. It take about 30 minutes to replace.
|
|
|
Post by dacjeep on Feb 23, 2011 21:46:33 GMT -5
thanks again.... I will check it out and let you know if it works or not.
|
|