|
Post by GrassRootsPR on Oct 24, 2008 21:07:23 GMT -5
part number 6034966 BOLT, .312-24x1.170, Front Prop Shaft to Transfer Case Yoke Does anyone know what size a standard would be ? I'm told .312 = 5/16" Thanks to a Jeep Forum I found this illustration.
|
|
|
Post by waterman on Oct 25, 2008 5:58:59 GMT -5
|
|
|
Post by GrassRootsPR on Oct 25, 2008 7:07:56 GMT -5
Thanks Waterman !
|
|
|
Post by billdacat on Oct 25, 2008 8:44:28 GMT -5
In a pinch you might find them in a u-joint strap kit. The bolts are grade 8 flange bolts. I have an extra set of four of the little buggers if you need them for this weekend.
Lenaham Jeep (RT73) parts department is great for this type of stuff but you may have to wait a day or two.
I will be home almost all day Saturday. Shoot me an e-mail or call my home if you want the bolts.
|
|
|
Post by GrassRootsPR on Oct 25, 2008 10:46:57 GMT -5
They're a little bigger than the u-strap bolts. I tried them but they were too small.
They're the bolts that connect the CV to the Transfer Case Yoke.
|
|
|
Post by billdacat on Oct 25, 2008 12:04:23 GMT -5
I was wondering about that myself. But none the less I have the four bolts that connect the yoke to the CV shaft. I acquired them when doing my SYE last year. I always buy extra bolts when I do things.
|
|
|
Post by billdacat on Oct 25, 2008 12:12:36 GMT -5
Check your e-mail...
|
|