|
|
Post by waterman on Nov 11, 2008 17:33:29 GMT -5
OK guy's and girl's I got the word today from the state park police, they will be at Sundays meeting. With that said make sure you have any and all questions ready,,, She will answer all the questions we have, if she does not have an answer to any one question asked she will get an answer back to me.
|
|
JeepR
Jeep Nut
without a paddle!!!
Posts: 280
|
Post by JeepR on Nov 11, 2008 17:37:39 GMT -5
Sounds good, I look forward to it... Thanks again for putting this together for us...
|
|
|
|
Post by rredneck on Nov 13, 2008 6:07:14 GMT -5
WHAT TIME SUNDAY
|
|
|
|
Post by waterman on Nov 13, 2008 12:21:51 GMT -5
10 am is the meeting
|
|
|
|
Post by waterman on Nov 13, 2008 14:34:45 GMT -5
The meeting is this sunday the 16th the prez sent an email to all members
|
|
|
|
Post by rredneck on Nov 13, 2008 15:56:52 GMT -5
THANKS SAME PLACE . MY EMAIL # I CHANGE .NEED TO LET THE PREZ KNOW NEW EMAIL #
|
|
|
|
Post by Founding Father on Nov 13, 2008 22:49:02 GMT -5
yes you do ...i got it  |
|
|
|
Post by GrassRootsPR on Nov 14, 2008 6:59:14 GMT -5
Nice work Waterman, looking forward to it.
|
|
|
|
Post by GrassRootsPR on Nov 15, 2008 19:21:23 GMT -5
We'll have Coffee & Donuts for everyone so don't eat
|
|
|
|
Post by bobenbeth on Nov 15, 2008 19:31:12 GMT -5
well i cant bring the jeep tomorrow. I am still fixing it from RC. I replaced the u joint today. Pulled out the air box and hose. I found holes in the intake hose. So i will replace that. Pulled the starter out and I still need to get a new one. While under i noticed a broken exhaust u bolt. I also noticed a rear upper shock bolt loose. I tried to tighten and broke the bolt, so now i have to drill and tap. Fluids are good> i also got a new cap and rotor. Hopefully in another week i will be back on the trail. With all the rain i cant wait.....
DOES ANYONE KNOW IF I CAN JUST BUY THE RUBBER BUSHINGS FOR SWAYBAR LINKS...I am going to have to buy a set(also broke one at RC)
|
|
|
|
Post by GrassRootsPR on Nov 15, 2008 19:37:06 GMT -5
|
|
|
|
Post by Founding Father on Nov 15, 2008 19:51:27 GMT -5
should be i have drag link bushings too if you need them Bob
|
|
