james
Rock Crawler
Elis's Pizzirea 809-1000 DELivers to Atco and waterford areas
Posts: 59
|
my rig
Dec 29, 2008 0:30:09 GMT -5
Post by james on Dec 29, 2008 0:30:09 GMT -5
|
|
|
my rig
Dec 30, 2008 18:11:45 GMT -5
Post by HamiltonLJ on Dec 30, 2008 18:11:45 GMT -5
WELCOME to the site !
|
|
james
Rock Crawler
Elis's Pizzirea 809-1000 DELivers to Atco and waterford areas
Posts: 59
|
my rig
Dec 30, 2008 18:34:04 GMT -5
Post by james on Dec 30, 2008 18:34:04 GMT -5
thanks
|
|
JeepR
Jeep Nut
without a paddle!!!
Posts: 280
|
my rig
Dec 30, 2008 20:53:29 GMT -5
Post by JeepR on Dec 30, 2008 20:53:29 GMT -5
James, I read you were looking for a 2" lift kit... found these on craigslist...http://southjersey.craigslist.org/pts/971466268.html These are aluminum, probably could get rubber BB lift kit for a little cheaper...
|
|
james
Rock Crawler
Elis's Pizzirea 809-1000 DELivers to Atco and waterford areas
Posts: 59
|
my rig
Dec 31, 2008 10:45:48 GMT -5
Post by james on Dec 31, 2008 10:45:48 GMT -5
well thats the cheapest price i have seen so far for spacers but i really think i should wait for the spring kit becuase i will eventully upgrade to it any way. but i am still tempted to buy those so Thankyou
|
|
|
my rig
Dec 31, 2008 11:02:06 GMT -5
Post by HamiltonLJ on Dec 31, 2008 11:02:06 GMT -5
Thats the billet lift I had on the LJ it may be the same one because I cut the corners off like you see in the pic. I used it with 33-12.50s on stock rims. If you use 12.50s you will need wheel spacers I can get all 4 spacers for around $100. LJ w/billet lift + 33s
|
|
james
Rock Crawler
Elis's Pizzirea 809-1000 DELivers to Atco and waterford areas
Posts: 59
|
my rig
Dec 31, 2008 11:38:06 GMT -5
Post by james on Dec 31, 2008 11:38:06 GMT -5
i dont know i really have to wait till i get my next book check from college till i can afford a lift in general so until then i am shopping around.
|
|